Cisco QSFP-100G-DR-S Compatible LINK-PP LQ-SM31100-DR1C 100GBASE-DR QSFP28 Duplex LC/UPC SMF Optical Transceiver Module (Single Lambda, SMF, 1310nm, 500m, LC, DOM)The LQ-SM31100-DR1C 100GBASE-DR Single Lambda QSFP optical transceiver module is designed for use in 100GBASE Ethernet throughput up to 500m over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. The 100 Gigabit Ethernet signal is carried over a single wavelength using onboard PAM4 modulation and FEC. The transceiver includes a Broadcom chip to convert the 4x25G NRZ electrical signals to a

Cisco QSFP-4X10G-LR-S Compatible LINK-PP LQ-M3140-LR4C QSFP+ 4 x 10GBASE-LR Optical Transceiver Module (SMF, 1310nm, 10km, MTP/MPO-12, DOM)The transceiver is designed for 10km optical communication applications,which compliant to 40GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 channels signals, and converts them to 4 channel output

Cisco QSFP-100G-4W40-I Compatible LINK-PP LQ-LW100-ER4I 100G QSFP28 ZR4 Duplex LC/UPC SMF Optical Transceiver Module (SMF, 1310nm, 40km, DOM, Industrial)LINK-PP LQ-LW100-ER4I  QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 40km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. And This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4 standard. LINK-PP Part Number LQ-LW100-ER4I  Cisco Compatible QSFP-100G-4W4

Cisco QSFP-100G-ZR4-S Compatible LINK-PP LQ-LW100-ZR4C 100GBASE-ZR4 QSFP28 Duplex LC/UPC Optical Transceiver Module(SMF, 1310nm, 80km, DOM)It is designed for 80km optical communication applications. This module contains 4- lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1. LINK-PP Part Number LQ-LW100-ZR4C Cisco Compatible QSFP-100

Cisco QSFP-100G-LR4-I Compatible LINK-PP LQ-LW100-LR4I 100G QSFP28 LR4 DOM Duplex LC Optical Transceiver Module(SMF, 1310nm, 10km, DOM, Industrial)The LQ-LW100-LR4I QSFP28 module provides 100GBase-LR4 throughput up to 10km over a standard pair of single mode fiber (SMF) with duplex LC connectors. This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm, SFF-8665 and SFF-8636 standards.  LINK-PP Part Number LQ-LW100-LR4I Cisco Compatible QSFP-100G-LR4-I Form Factor

Cisco QSFP-40G-LR4 Compatible LINK-PP LQ-CW40-LR4C QSFP+ 40GBASE-LR4 Duplex LC/UPC Optical Transceiver Module (SMF, 1310nm, 10km, LC, DOM)The QSFP+ LR4 transceivers are high performance, cost effective modules supporting data rate of 40Gbps and 10km transmission distance with SMF.The transceiver consists of three sections: 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals,and multiplexes them into a single channel for 40Gb/s optical transmission; on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and

Cisco QSFP-ELR4-40G Compatible LINK-PP LQ-CW40-L24C 40GBASE-T QSFP+ Optical Transceiver Module DOM Duplex LC(SMF, 1310nm, 20km)The LQ-CW40-L24C QSFP+ FR4 transceivers are high performance, cost effective modules supporting data rate of 40Gbps and 20km transmission distance with SMF.The transceiver consists of three sections: 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals,and multiplexes them into a single channel for 40Gb/s optical transmission; on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts

Cisco WSP-Q40GLR4L Compatible LINK-PP LQ-CW40-FR4C 40GBASE-T QSFP+ Optical Transceiver Module DOM Duplex LC(SMF, 1310nm, 2km, LC,)The LQ-CW40-FR4C QSFP+ FR4 transceivers are high performance, cost effective modules supporting data rate of 40Gbps and 2km transmission distance with SMF.The transceiver consists of three sections: 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals,and multiplexes them into a single channel for 40Gb/s optical transmission; on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts

Cisco SFP-10/25G-LR-S Compatible LINK-PP LS-SM3125E-10C SFP28 10/25GBASE-LR Dual-rate Duplex LC/UPC Optical Transceiver Module (SMF, 1310nm, 10km, DOM)The LS-SM3125E-10C SFP28 transceiver provides 10/25GBASE-LR throughput up to 10km over single mode fiber (SMF) using a wavelength of 1310nm via an LC duplex connector. This module provides 10G backward compatibility and simplifies network upgrade. It provides connectivity option for 25G Ethernet, 10G Ethernet and data center. It is fully compliant with the SFP28 MSA, SFF-8472, SFF-8402, SFF-8432 and applicable portions of SFF-8431

Cisco SFP-10G-LRM-I Compatible LINK-PP LS-MM3110-S2I 10GBASE-LRM SFP+ Optical Transceiver Module (MMF/SMF, 1310nm, 220m/1.4km, LC, Industrial, DOM)The LS-MM3110-S2I SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 220m transmission distance with MMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

Cisco SFP-10/25G-LR-I Compatible LINK-PP LS-SM3125E-10I SFP28 10/25GBASE-LR Dual-rate Duplex LC/UPC Optical Transceiver Module (Industrial,SMF, 1310nm, 10km, DOM)The LS-SM3125E-10I SFP28 transceiver provides 10/25GBASE-LR throughput up to 10km over single mode fiber (SMF) using a wavelength of 1310nm via an LC duplex connector. This module provides 10G backward compatibility and simplifies network upgrade. It provides connectivity option for 25G Ethernet, 10G Ethernet and data center. It is fully compliant with the SFP28 MSA, SFF-8472, SFF-8402, SFF-8432 and applicable portions of SFF-843

Cisco SFP-10G-LRM Compatible LINK-PP LS-MM3110-S2C 10GBASE-LRM SFP+ Optical Transceiver Module (MMF/SMF, 1310nm, 220m/300m, LC, DOM)The LS-MM3110-S2C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 220m transmission distance with MMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital

Cisco SFP-10G-BX60D Compatible LINK-PP LS-BL332710-60C 10GBASE-BX60-D BiDi SFP+ Optical Transceiver Module(SMF, 1330nm-TX/1270nm-RX, 60km, LC, DOM)The LS-BL332710-60C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 60km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a APD photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

Cisco SFP-10G-BX40D-I Compatible LINK-PP LS-BL332710-40I SFP+ 10GBASE-BX BiDi Simplex Optical Transceiver Module(SMF, 1330nm-TX/1270nm-RX, 40km, LC, DOM, Industrial)The LS-BL332710-40I SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 20km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source

Cisco SFP-10G-BX40D Compatible LINK-PP LS-BL332710-40C SFP+ 10GBASE-BX BiDi Simplex Optical Transceiver Module(SMF, 1330nm-TX/1270nm-RX, 40km, LC, DOM)The LS-BL332710-40C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 20km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-84

Cisco SFP-10G-BX20D Compatible LINK-PP LS-BL332710-20C SFP+ 10GBASE-BX20-D BiDi Simplex LC/UPC Optical Transceiver Module(SMF, 1330nm-TX/1270nm-RX, 20km, LC, DOM)The LS-BL332710-20C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 20km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source