LINK-PP LS-DW2510-40I 10G DWDM SFP+ Transceiver Module (SMF, 1557.36nm, 40km, LC, Industrial, DOM)The SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be deployed in the DWDM networking equipment in metropolitan access and

LINK-PP LS-DW2410-40I 10G DWDM SFP+ Transceiver Module (SMF, 1558.17nm, 40km, LC, Industrial, DOM)The SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be deployed in the DWDM networking equipment in metropolitan access and

LINK-PP LS-BL31552G-40I SFP 2.5G BiDi Simplex LC/UPC Optical Transceiver Module(SMF, 1310nm-TX/1550nm-RX, 20km, LC, DOM,Industrial)The LS-BL31552G-40I SFP transceivers are high performance, cost effective modules supporting data rate of 2.5Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

LINK-PP LS-BL31552G-40C SFP 2.5G BiDi Simplex LC/UPC Optical Transceiver Module(SMF, 1310nm-TX/1550nm-RX, 20km, LC, DOM)The LS-BL31552G-40C SFP transceivers are high performance, cost effective modules supporting data rate of 2.5Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital

LINK-PP LS-BL31552G-20I SFP 2.5G BiDi Simplex LC/UPC Optical Transceiver Module(SMF, 1310nm-TX/1550nm-RX, 20km, LC, DOM,Industrial)The LS-BL31552G-20I SFP transceivers are high performance, cost effective modules supporting data rate of 2.5Gbps and 20km transmission distance with SMF.The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

LINK-PP LS-BL31552G-20C SFP 2.5G BiDi Simplex LC/UPC Optical Transceiver Module(SMF, 1310nm-TX/1550nm-RX, 20km, LC, DOM)The LS-BL31552G-20C SFP transceivers are high performance, cost effective modules supporting data rate of 2.5Gbps and 20km transmission distance with SMF.The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital

LINK-PP LS-DW2310-40I 10G DWDM SFP+ Transceiver Module (SMF, 1558.98nm, 40km, LC, Industrial, DOM)The SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be deployed in the DWDM networking equipment in metropolitan access and

LINK-PP LPJE108-0AHNL RJ45 2x4 Port Side Entry PCB Jacks With Shield Green&Yellow/Green&Yellow LED Without magnetics transformer  LINK-PP Part Number LPJE108-0AHNL Connector Type Jack Part Status Active Mounting Type Through Hole Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan - Number of Ports2x4 PortSpeed- LatchBothCores per Port-

LINK-PP LP79604PNL 2.5G Base-T High PoE++ Ethernet Transformer Quad Port Surface Mount Magnetics Modules  LINK-PP Part Number LP79604PNL Transformer Type Lan Transformer Part Status Active Turns Ratio - Primary:Secondary 1:1 Transmitter, 1:1 Receiver Construction OPEN FRAME Application-Lan Ethernet(PoE++) Number of PortsQuad PortSpeed2.5G Base-T PackageTape

LINK-PP LS-DW2210-40I 10G DWDM SFP+ Transceiver Module (SMF, 1559.79nm, 40km, LC, DOM)The SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be deployed in the DWDM networking equipment in metropolitan access and core networks.

LINK-PP LPJK7403B98NL 10/100/1000 Base-T Low Profile RJ45 Magjack Connector For Solar Inverter ( Height 11.30mm,Orange&Green/Yellow,Tab Up)The LPJK7403B98NL supports speed 10/100/1000 Base-T, It is compliant to IEEE 802.3, UL, Reach, RoHs, ISO19001,ISO14001 standards.It can be used to support application, such as New Energy, Set-top Box, Fieldbus System . LINK-PP Part Number LPJK7403B98NL Connector Type Jack Part Status Active Mounting Type Through Hole

LINK-PP LS-DW2110-40I 10G DWDM SFP+ Transceiver Module (SMF, 1560.61nm, 40km, LC, DOM)The SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be deployed in the DWDM networking equipment in metropolitan access and core networks.

LINK-PP LS-DW2010-40I 10G DWDM SFP+ Transceiver Module (SMF, 1561.41nm, 40km, LC, DOM)The SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be deployed in the DWDM networking equipment in metropolitan access and core networks.

LINK-PP LS-DW1910-40I 10G DWDM SFP+ Transceiver Module (SMF, 1562.23nm, 40km, LC, DOM)The SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be deployed in the DWDM networking equipment in metropolitan access and core networks.

LINK-PP LS-DW1810-40I 10G DWDM SFP+ Transceiver Module (SMF, 1563.05nm, 40km, LC, DOM)The SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be deployed in the DWDM networking equipment in metropolitan access and core networks.

LINK-PP LS-DW1710-40I 10G DWDM SFP+ Transceiver Module (SMF, 1563.86nm, 40km, LC, DOM)The SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be deployed in the DWDM networking equipment in metropolitan access and core networks.