LINK-PP LP14CC01000S SFP28 1x4 Cage With EMI Spring Finger LINK-PP Part Number LP14CC01000S Part Status Active Connector Style Cage, Ganged (1 x 4) Connector Type SFP28 Data Rate (Max)(Gb/s)32Mounting TypeThrough Hole, Right AngleTerminationPress-FitFeaturesEMI Shielded Port Matrix Configuration1x4 PortsNumber of Ports4 Operating Temperature Range-40 – 85°CIncluded Lightpipe- PCB Thickness

LINK-PP LPJE17208NNL RJ45 2X1 Connectors Double Deck Gang Pcb Jack without Integrated Magnetics , Without LED, Tab Both, RoHS LINK-PP Part Number LPJE17208NNL Connector Type Jack Part Status Active Mounting Type Through Hole Number of Ports2x1 PortSpeed- LatchBothCores per Port- Orientation90° Angle (Right)PCB Mount AngleSIDE ENTRY Shield EMI TabsWithoutLED OptionWithout Leds PCBFR4PCB

LINK-PP LPJE17208DNL RJ45 2X1 Connectors Double Deck Gang Pcb Jack without Integrated Magnetics , Without LED, Tab Both, RoHS LINK-PP Part Number LPJE17208DNL  Connector Type Jack Part Status Active Mounting Type Through Hole Number of Ports2x1 PortSpeed- LatchBothCores per Port- Orientation90° Angle (Right)PCB Mount AngleSIDE ENTRY Shield EMI TabsWithoutLED OptionWithout Leds PCBFR4PCB

LINK-PP LFF5-SM5501-A0AC 155M 2x5 SFF Optical Transceiver Module The LF5-xMxx01-xxAC series of transceiver modules are the perfect solution for low -speed communication networks.These transceiver modules support data rates up to 200Mbps. The module is fully compliant with the 2X5 standard package defined by the Small Form Factor Multi Sourcing Agreement(MSA).These transceiver modules provide the system designer with products to implement a range of FDDI and ATMdesigns at the 100Mbps/125Mbps rate and SONET/OC-3, SDH/STM-1 for Telecommunication.

LINK-PP LP14BC01000 SFP+ 1X4 Cage With EMI Spring Finger LINK-PP Part Number  LP14BC01000 Part Status Active Connector Style Cage Connector Type SFP+ MaterialNickel SilverThickness0.25mm Port Matrix Configuration1x1 PortNumber of Ports1 Operating Temperature Range-55 – 85°CMounting StyleThrough Hole, Right Angle Included Lightpipe-TerminationPress-FitHeight (Inches/mm)0.352/8.95Length 

LINK-PP LP26BC01101 SFP+ 2x6 Cage Connector With EMI Spring Finger Light Pipe  LINK-PP Part Number LP26BC01101 Part Status Active Connector Style Receptacle with Cage, Ganged (2x6) Connector Type SFP+ Data Rate (Max)(Gb/s)16Mounting TypeThrough Hole, Right AngleTerminationPress-FitFeaturesEMI Shielded Port Matrix Configuration2x6 PortsNumber of Ports12 Operating Temperature Range-40 – 85°CIncluded LightpipeInner Light Pipe

LINK-PP LS-DW2810-40I 10G DWDM SFP+ Transceiver Module (SMF, 1554.94nm, 40km, LC, Industrial, DOM)The SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be deployed in the DWDM networking equipment in metropolitan access and core

LINK-PP LPJE160NENL RJ45 Modular Jack without Integrated Magnetics for router and Switch(1X1 Port, Tab Down ,Green/Yellow Led) LINK-PP Part Number LPJE160NENL Connector Type Jack Part Status Active Mounting Type Through Hole Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan - Number of Ports1x1 PortSpeed- LatchDown Cores per Port-

LINK-PP LPJG47047A4NL 100/1000 Base-T Integrated Magnetics RJ45 Jack for Ethernet Control and Monitoring System (2x4 Port,Yellow&Green/Yellow&Green Leds)The LPJG47047A4NL supports speed 100/1000 Base-T, It is compliant to IEEE 802.3 at, UL, Reach, RoHs, ISO19001,ISO14001 standards.It can be used to support application, such as Monitoring System, Network Firewall, Switches and Server. LINK-PP Part Number LPJG47047A4NL Connector Type Jack Part Status Active Mounting Type

LINK-PP LS-DW2710-40I 10G DWDM SFP+ Transceiver Module (SMF, 1555.75nm, 40km, LC, Industrial, DOM)The SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be deployed in the DWDM networking equipment in metropolitan access and core

LINK-PP LPA0866ANL Single Port 8 PIN Flaback Lan Transformer Modules LINK-PP Part Number LPA0866ANL Transformer Type Lan Transformer Part Status Active Application-Lan Ethernet(NoN PoE) Construction OPEN FRAME Cores per Port 1 Number of PortsSingle PortPIN number8 PackageTape & ReelTemperature-40℃ TO 85℃ AutomDXYesCommentSAME AS NL VERSION

LINK-PP LS-DW2610-40I 10G DWDM SFP+ Transceiver Module (SMF, 1556.55nm, 40km, LC, Industrial, DOM)The SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be deployed in the DWDM networking equipment in metropolitan access and core

LINK-PP LS-DW2510-40I 10G DWDM SFP+ Transceiver Module (SMF, 1557.36nm, 40km, LC, Industrial, DOM)The SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be deployed in the DWDM networking equipment in metropolitan access and

LINK-PP LS-DW2410-40I 10G DWDM SFP+ Transceiver Module (SMF, 1558.17nm, 40km, LC, Industrial, DOM)The SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8432 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be deployed in the DWDM networking equipment in metropolitan access and

LINK-PP LS-BL31552G-40I SFP 2.5G BiDi Simplex LC/UPC Optical Transceiver Module(SMF, 1310nm-TX/1550nm-RX, 20km, LC, DOM,Industrial)The LS-BL31552G-40I SFP transceivers are high performance, cost effective modules supporting data rate of 2.5Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472

LINK-PP LS-BL31552G-40C SFP 2.5G BiDi Simplex LC/UPC Optical Transceiver Module(SMF, 1310nm-TX/1550nm-RX, 20km, LC, DOM)The LS-BL31552G-40C SFP transceivers are high performance, cost effective modules supporting data rate of 2.5Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital