LINK-PP LS-BL554910-A0I 10G BiDi Simplex SFP+ Optical Transceiver Module(SMF, 1550nm-TX/1490nm-RX,100km, LC, DOM, Industrial)The LS-BL554910-A0I SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 100km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi Source Agreement and SFF-8472 digital

LINK-PP LS-BL554910-A0C 10G BiDi Simplex SFP+ Optical Transceiver Module(SMF, 1550nm-TX/1490nm-RX,100km, LC, DOM)The LS-BL554910-A0C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 100km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi Source Agreement and SFF-8472 digital diagnostics

LINK-PP LQ-M8540-SR4I QSFP+ 40GBASE-SR4 MPO-12/UPC Optical Transceiver Module(MMF, 850nm, 150m, DOM, Industrial)The LQ-M8540-SR4I QSFP+ module adopts 12 Fibers MTP/MPO Male connectors, reaching a link up to 150m over OM4 MMF (100m over OM3). This transceiver is compliant with QSFP+ MSA, IEEE 802.3ba 40GBASE-SR4 and breakout to 4x10GBASE-SR standard. At the same time, it is completely interoperable with all standard 40GBASE-SR4 interfaces. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP+ MSA, to allow access to real-time operating parameters.

LINK-PP LQ-M8540-SR4C QSFP+ 40GBASE-SR4 MPO-12/UPC Optical Transceiver Module(MMF, 850nm, 150m, DOM)The LQ-M8540-SR4C QSFP+ module adopts 12 Fibers MTP/MPO Male connectors, reaching a link up to 150m over OM4 MMF (100m over OM3). This transceiver is compliant with QSFP+ MSA, IEEE 802.3ba 40GBASE-SR4 and breakout to 4x10GBASE-SR standard. At the same time, it is completely interoperable with all standard 40GBASE-SR4 interfaces. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP+ MSA, to allow access to real-time operating parameters. With its

LINK-PP LP-RJ45TG-3YI SFP+ 10GBASE-T Copper 30m RJ-45 Transceiver Module (Copper, Industrial, 30m, RJ-45)LP-RJ45TG-3YI Copper Small Form Pluggable (SFP) transceivers are high performance, cost effective module compliant with the 10G Ethernet and 10GBASE-T standards as specified in IEEE 802.3az, which supporting 10Gbps data- rate up to 30 meters reach over unshielded twisted-pair category 6a/7 cables. The module provides standard serial ID information compliant with SFP+ MSA, which can be accessed with address of A0h via the 2wire serial EEPROM protocol.

LINK-PP LP-RJ45TG-3YC 10GBase-T SFP+ Transceiver Module(Copper, 30m, RJ-45)LP-RJ45TG-3YC Copper Small Form Pluggable (SFP) transceivers are high performance, cost effective module compliant with the 10G Ethernet and 10GBASE-T standards as specified in IEEE 802.3az, which supporting 10Gbps data- rate up to 30 meters reach over unshielded twisted-pair category 6a/7 cables. The module provides standard serial ID information compliant with SFP+ MSA, which can be accessed with address of A0h via the 2wire serial EEPROM protocol. LINK-PP Part Number LP-RJ4

LINK-PP LP-RJ452G-TI SFP 2.5GBASE-T Transceiver Module (Copper, 100m, RJ-45, Industrial )The LP-RJ452G-TI 2.5GBASE-T Copper Small Form Pluggable transceivers are based on the SFP Multi Source Agreement (MSA).They are compatible with the 2.5Gbase-T and 1000BASE-T standards as specified in IEEE Std 802.3. They are RoHS compliant and per Directive 2011/65/EU. LINK-PP Part Number LP-RJ452G-TI Vendor Name LINK-PP Form Factor SFP Max Data Rate 2.5Gbps

LINK-PP LP-RJ452G-TC SFP 2.5GBASE-T Transceiver Module (Copper, 100m, RJ-45)The LP-RJ452G-TC 2.5GBASE-T Copper Small Form Pluggable transceivers are based on the SFP Multi Source Agreement (MSA).They are compatible with the 2.5Gbase-T and 1000BASE-T standards as specified in IEEE Std 802.3. They are RoHS compliant and per Directive 2011/65/EU. LINK-PP Part Number LP-RJ452G-TC Vendor Name LINK-PP Form Factor SFP Max Data Rate 2.5Gbps

LINK-PP LS-BL495510-A0C 10GBASE-BX80-U BiDi Simplex SFP+ Optical Transceiver Module(SMF, 1490nm-TX/1550nm-RX 100km, LC, DOM)The LS-BL495510-A0C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 100km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi Source Agreement and SFF-8472 digital

LINK-PP LS-SM551G-A2I 1.25G SFP Duplex LC/UPC Optical Transceiver Module(SMF, 1550nm, 120km, LC, DOM, Industrial)The LS-SM551G-A2I SFP transceivers are high performance, cost effective modules supporting data rate of 1.25Gbps and 120km transmission distance with SMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions.

LINK-PP LQ-SM31100-DR1C 100GBASE-DR QSFP28 Duplex LC/UPC SMF Optical Transceiver Module (Single Lambda, SMF, 1310nm, 500m, LC, DOM)The LQ-SM31100-DR1C 100GBASE-DR Single Lambda QSFP optical transceiver module is designed for use in 100GBASE Ethernet throughput up to 500m over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. The 100 Gigabit Ethernet signal is carried over a single wavelength using onboard PAM4 modulation and FEC. The transceiver includes a Broadcom chip to convert the 4x25G NRZ electrical signals to a 1x100G PAM-4 optical signal. Digital

LINK-PP LQ-M3140-LR4C QSFP+ 4 x 10GBASE-LR Optical Transceiver Module (SMF, 1310nm, 10km, MTP/MPO-12, DOM)The transceiver is designed for 10km optical communication applications,which compliant to 40GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 channels signals, and converts them to 4 channel output electrical data.

LINK-PP LQ-LW100-ER4I 100G QSFP28 ZR4 Duplex LC/UPC SMF Optical Transceiver Module (SMF, 1310nm, 40km, DOM, Industrial)LINK-PP LQ-LW100-ER4I  QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 40km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. And This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4 standard. LINK-PP Part Number LQ-LW100-ER4I  Vendor Name LINK-PP Form Factor

LINK-PP LQ-LW100-ZR4I 100GBASE-ZR4 QSFP28 Duplex LC/UPC Optical Transceiver Module(SMF, 1310nm, 80km, DOM, Industrial)It is designed for 80km optical communication applications. This module contains 4- lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1. LINK-PP Part Number LQ-LW100-ZR4I Vendor Name LINK-PP

LINK-PP LPJG48853AENL-2 100/1000 Base-T RJ45 1x4 Gigabit Magnetic Jacks for Optical Terminal and Bluray (1x4 Port ,Tab Up,Green/Yellow LED)The LPJG48853AENL-2 supports speed 10/100/1000 Base-T, It is compliant to IEEE 802.3, UL, Reach, RoHs, ISO19001,ISO14001 standards.It can be used to support application, such as Optical Terminal, Bluray,DVD and Webcams. LINK-PP Part Number LPJG48853AENL-2 Connector Type Jack Part Status Active Mounting Type Through Hole

LINK-PP LQ-LW100-ZR4C 100GBASE-ZR4 QSFP28 Duplex LC/UPC Optical Transceiver Module(SMF, 1310nm, 80km, DOM)It is designed for 80km optical communication applications. This module contains 4- lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1. LINK-PP Part Number LQ-LW100-ZR4C Vendor Name LINK-PP Form