LINK-PP LP-RJ452G-TC SFP 2.5GBASE-T Transceiver Module (Copper, 100m, RJ-45)The LP-RJ452G-TC 2.5GBASE-T Copper Small Form Pluggable transceivers are based on the SFP Multi Source Agreement (MSA).They are compatible with the 2.5Gbase-T and 1000BASE-T standards as specified in IEEE Std 802.3. They are RoHS compliant and per Directive 2011/65/EU. LINK-PP Part Number LP-RJ452G-TC Vendor Name LINK-PP Form Factor SFP Max Data Rate 2.5Gbps

LINK-PP LS-BL495510-A0C 10GBASE-BX80-U BiDi Simplex SFP+ Optical Transceiver Module(SMF, 1490nm-TX/1550nm-RX 100km, LC, DOM)The LS-BL495510-A0C SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 100km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi Source Agreement and SFF-8472 digital

LINK-PP LS-SM551G-A2I 1.25G SFP Duplex LC/UPC Optical Transceiver Module(SMF, 1550nm, 120km, LC, DOM, Industrial)The LS-SM551G-A2I SFP transceivers are high performance, cost effective modules supporting data rate of 1.25Gbps and 120km transmission distance with SMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions.

LINK-PP LQ-SM31100-DR1C 100GBASE-DR QSFP28 Duplex LC/UPC SMF Optical Transceiver Module (Single Lambda, SMF, 1310nm, 500m, LC, DOM)The LQ-SM31100-DR1C 100GBASE-DR Single Lambda QSFP optical transceiver module is designed for use in 100GBASE Ethernet throughput up to 500m over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. The 100 Gigabit Ethernet signal is carried over a single wavelength using onboard PAM4 modulation and FEC. The transceiver includes a Broadcom chip to convert the 4x25G NRZ electrical signals to a 1x100G PAM-4 optical signal. Digital

LINK-PP LQ-M3140-LR4C QSFP+ 4 x 10GBASE-LR Optical Transceiver Module (SMF, 1310nm, 10km, MTP/MPO-12, DOM)The transceiver is designed for 10km optical communication applications,which compliant to 40GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 channels signals, and converts them to 4 channel output electrical data.

LINK-PP LQ-LW100-ER4I 100G QSFP28 ZR4 Duplex LC/UPC SMF Optical Transceiver Module (SMF, 1310nm, 40km, DOM, Industrial)LINK-PP LQ-LW100-ER4I  QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 40km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. And This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4 standard. LINK-PP Part Number LQ-LW100-ER4I  Vendor Name LINK-PP Form Factor

LINK-PP LQ-LW100-ZR4I 100GBASE-ZR4 QSFP28 Duplex LC/UPC Optical Transceiver Module(SMF, 1310nm, 80km, DOM, Industrial)It is designed for 80km optical communication applications. This module contains 4- lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1. LINK-PP Part Number LQ-LW100-ZR4I Vendor Name LINK-PP

LINK-PP LPJG48853AENL-2 100/1000 Base-T RJ45 1x4 Gigabit Magnetic Jacks for Optical Terminal and Bluray (1x4 Port ,Tab Up,Green/Yellow LED)The LPJG48853AENL-2 supports speed 10/100/1000 Base-T, It is compliant to IEEE 802.3, UL, Reach, RoHs, ISO19001,ISO14001 standards.It can be used to support application, such as Optical Terminal, Bluray,DVD and Webcams. LINK-PP Part Number LPJG48853AENL-2 Connector Type Jack Part Status Active Mounting Type Through Hole

LINK-PP LQ-LW100-ZR4C 100GBASE-ZR4 QSFP28 Duplex LC/UPC Optical Transceiver Module(SMF, 1310nm, 80km, DOM)It is designed for 80km optical communication applications. This module contains 4- lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1. LINK-PP Part Number LQ-LW100-ZR4C Vendor Name LINK-PP Form

LINK-PP LQ-LW100-LR4I 100G QSFP28 LR4 DOM Duplex LC Optical Transceiver Module(SMF, 1310nm, 10km, DOM, Industrial)The LQ-LW100-LR4I QSFP28 module provides 100GBase-LR4 throughput up to 10km over a standard pair of single mode fiber (SMF) with duplex LC connectors. This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm, SFF-8665 and SFF-8636 standards.  LINK-PP Part Number LQ-LW100-LR4I Vendor Name LINK-PP Form Factor QSFP28 Max Data Rate

LINK-PP LQ-CW40-LR4C QSFP+ 40GBASE-LR4 Duplex LC/UPC Optical Transceiver Module (SMF, 1310nm, 10km, LC, DOM)The QSFP+ LR4 transceivers are high performance, cost effective modules supporting data rate of 40Gbps and 10km transmission distance with SMF.The transceiver consists of three sections: 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals,and multiplexes them into a single channel for 40Gb/s optical transmission; on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output

LINK-PP LQ-CW40-LR4I 40Gbps LR4 QSFP+ 1310nm 10km SMF Optical Transceiver Module DOM Duplex LC（40Gbps,1310nm,10km, Industrial）The LQ-CW40-LR4I QSFP+ module is designed for use in 40GBASE Ethernet throughput up to 10km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors.This transceiver is compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-LR4 and OTU3 C4S1-2D1 standard. LINK-PP Part Number LQ-CW40-LR4I Vendor Name LINK-PP Form Factor QSFP+ Max Data

LINK-PP LPJE841-0BGNLF RJ45 Connector Without Integrated Magnetics for router and Switch(1X1 Port, Tab Up ,Yellow/Green Led ) LINK-PP Part Number LPJE841-0BGNLF Connector Type Jack Part Status Active Mounting Type Through Hole Number of Positions/Contacts - Application-Lan - Number of Ports1x1 PortSpeed- LatchUpCores per Port- Orientation90° Angle (

LINK-PP LPJE265-0I47NLF RJ45 2X6 8p8c Connectors without Integrated Magnetics for Switch and Industrial PC(Yellow&Green/Yellow&Green Led) LINK-PP Part Number LPJE265-0I47NLF Connector Type Jack Part Status Active Mounting Type Through Hole Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan - Number of Ports2x6 PortSpeed-

LINK-PP LQ-CW40-L24C 40GBASE-T QSFP+ Optical Transceiver Module DOM Duplex LC(SMF, 1310nm, 20km)The LQ-CW40-L24C QSFP+ FR4 transceivers are high performance, cost effective modules supporting data rate of 40Gbps and 20km transmission distance with SMF.The transceiver consists of three sections: 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals,and multiplexes them into a single channel for 40Gb/s optical transmission; on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output

LINK-PP LQ-CW40-FR4C 40GBASE-T QSFP+ Optical Transceiver Module DOM Duplex LC(SMF, 1310nm, 2km, LC,)The LQ-CW40-FR4C QSFP+ FR4 transceivers are high performance, cost effective modules supporting data rate of 40Gbps and 2km transmission distance with SMF.The transceiver consists of three sections: 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals,and multiplexes them into a single channel for 40Gb/s optical transmission; on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output